BDC Example: Using Table Control in BDC

Go down

BDC Example: Using Table Control in BDC

Post  naveenchepuri on Tue Feb 28, 2012 2:55 pm

REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.

LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.

LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.

perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.

naveenchepuri

Posts : 23
Join date : 2012-01-31

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum